This battery pack is compatible with the RoadHawk Ride R+ Cycle Edition and RoadHawk Bullet R+ Moto Edition.
For use with the RoadHawk Ride the cable is supplied with the camera and not included with this battery.
An external, rechargeable Li-Poly battery pack that is built to be as tough as our cameras. It is waterproof to 3 meters.
This 2600 mAh Li-Poly battery allows you to continuously record for more than 4 hours. Once the battery is discharged simply unplug it and use the camera on its internal battery to give you a total of more than 5.5 hours of recording (additional MicroSD cards may be required if not loop recording).
Included with this product is a cradle with a flat and curved tray mount to easily secure your battery, and using the supplied 35cm cable it is ideal for mounting the battery near the camera and is ideally suited for use on a motorcycle or cycling helmet.
The 1.5m cable can be used when you need to have the battery further away or in a pocket or rucksack and the handy clip allows you to keep it from moving around there is also a 1.2m cable for when you are using the battery and the remote adapter on the camera.
The battery has 3 LED indicator lights that let you know the current level of charge: One light = 33%, Two lights = 66% and Three = Full, when charging they will flash until the battery is full charged. A quick press of the button above the LED’s will let you know the current capacity of the battery.
It can also be used to power other items and cameras by USB, but will not be waterproof.
Compatible with RoadHawk R+ (with or without remote) and Bullet HD2 and RoadHawk RIDE cameras.
When the battery pack is plugged in to the camera, it will start recording automatically.
When the power in the battery pack is depleted, the camera will stop recording. You can then continue to use the battery in the camera which will be fully charged at this point.
Please note that the camera will get warm to touch and this is perfectly normal.
Camera is not included with this product.
Input: 5V / 0.85A
Recharge Cycles: >500
Output: 5V / 1A
Working temp: -20 to +20c
Charge time: 4 Hours
Storage temp: -20 to +60c
1 x 2600mAh Li-Poly Battery
1 x 35cm Short Camera Cable
1 x 1.5m Long Camera Cable
1 x 1.2m Long Camera Cable (RF Remote connected)
1 x Battery Cradle Mount
1 x Flat Surface Mount
1 x Curved Surface Mount
1 x USB Charging Cable